Description
Technical Parameter
|
Technical Parameter
|
Putty-Normal setting
|
Light Body-Normal setting
|
|
Mixing Time
|
30s
|
/
|
|
Total Working Time(Temperature:23℃, Humidity:50%)
|
1 min 30s
|
2 min 15s
|
|
Setting Time in oral cavity
|
3 min
|
3 min 30s
|
|
Tensile strength
|
＞1.0MPa
|
＞2.0MPa
|
|
Tear strength
|
＞2.0kN/m
|
＞3.0kN/m
|
|
Elastic recovery
|
> 99.5%
|
> 99.5%
|
|
Dimensional change rate
|
< 0.5%
|
< 0.5%
|
|
Hardness Shore A
|
≈67
|
≈56
|
|
Color
|
Base: Purple; Catalyst: White
|
Base: Orange; Catalyst: White
|
|
Shelf life
|
2 years
|
2 years
|
CONTENT
| 400g*1 | Putty Base |
| 400g*1 | Putty Catalyst |
| 2 | Measuring Spoons |
| 50ml*1 | Light Body Bio-cartridge |
CONTENT
| 400g*1 | Putty Base |
| 400g*1 | Putty Catalyst |
| 2 | Measuring Spoons |
| 50ml*1 | Light Body Bio-cartridge |
Operation Procedures
Two-step impression technique with putty and light body
1.Choose a suitable tray: A rigid tray of sufficient size and wall height is is recommended to offer stability and support for impression
2.Clean and dry hands, disposable polythene gloves are recommended
3. Mix the alkali and catalyst in a 1:1 ratio using the appropriate measuring spoon. Mix the ingredients with fingertips until the color is uniform and streak-free, with a mixing time of 30 seconds. Knead the putty into a stick shape and place it into the tray, placing the tray slowly into the correct position for a total operating time of 1 minute and 30 seconds. Bite down and maintain passive pressure for 3 minutes until the material becomes solid.
4.Adjust the putty impression with silicone cut to make out the row spillway space.
5.Inject Light Body into putty impression and prepared tooth, the intraoral tip should remain submerged in material while syringing, total operation within 2min15s.
6.Take the second impression, intraoral setting time 3min 30s.